Sunday, June 30, 2013

Plaster Word of the Day; 1 - 10

Image courtesy of Plâtres Vieujot
PLASTER

One of the foundations of a good trade education is understanding the vocabulary of that trade. So for a plaster education we’ll begin with the most fundamental of terms, Plaster.

In some languages and localized areas of the English speaking world plaster is ‘mineral specific’, such as a gypsum derived material, or ‘use specific’ such as a coating applied in interior. However, our English word “plaster” ultimately derives from the Greek ‘emplastron’ (εμπλαστρον) meaning “to daub on”.

So the term “plaster” can rightly describe a variety of interior or exterior coatings that are daubed, thrown or trowel applied.



SCREED

Finally we have an English word that has its roots in…English!
Screed is an Old English word that originally meant a strip of cloth but eventually came to mean a strip of anything. In fact, ‘shred’ has the very same etymology.

In plastering it refers to strips serving as a termination and guide for the larger infill areas. Often if wood, metal or non-plaster materials are used it will be referred to as a ‘ground’. However, if the strip is made of plaster it maintains the name screed.

Also, a screed is a generic term for the straight edge used to level the infill surface and the act of leveling is called ‘screeding’. There are a variety of screeds that have specialty applications with names such as rods, darbies, slickers etc.



RENDER, FLOAT, SET

This grouping of vocabulary comes from across the pond, common terminology in the UK and Ireland.


It is most descriptive (but not exclusively) of the traditional 3 coat lime plastering system used over monolithic substrates such as brick or stone.

The RENDER is the first coat of plaster, the ‘coarse stuff’ with large, sharp aggregates. It is applies rough and and gets scratched up to provide a mechanical key or bonding surface for the next coat.

The FLOAT is the next coat with the same material. However, the surface is scoured, compressed and leveled with a wooden hand float, hence the name.

The SET, is the final coat. This is the final mix with lime putty and fine aggregates with Plaster of Paris (gypsum plaster) added to initiate a 'set' or firming up of the lime.



GYPSUM PLASTER

Image courtesy of Plâtres Vieujot
The Greek work ‘gypsos’ (γύψος) described the mineral that we today identify as gypsum.
Gypsum plasters may contain sand and small percentages of other binders such clay or lime.
Many useful gypsum plasters are in fact a blend of different types of gypsum:

Gyp – Pulverized gypsum with the chemical designation hydrated calcium sulphate (CaSO4•2H2O). Often used as a natural accelerator in gypsum plaster.

Beta Gypsum – Gypsum baked at a low temperature to form calcium sulphate hemi-hydrate (CaSO4•~0.5H2O). Also, known as Plaster of Paris.

Alpha Gypsum – The hemi-hydrate form baked under higher barometric pressure. The resulting material can have up to 10 times the compressive strength of beta gypsum.

Anhydrous Gypsum – Gypsum baked at a higher temperature to form pure calcium sulphate (CaSO4). Often used as a natural retarder in gypsum plaster.



BLISTER BRUSH

Also known as a ‘felt brush’ or just a ‘mop’.

This is an effective tool for moisture management when finishing clay, lime or gypsum plasters.


The release of water is directly related to pressure applied. Over-saturated areas common with sponges and pump sprayers are easily avoided with a blister brush.

 
SGRAFITTO



Image courtesy of Plâtres Vieujot
This technique of carving into a plaster to reveal a contrasting colour underneath is very much associated with the Italian tradition from whom we have directly borrowed the word sgrafitto meaning ‘scratched’. However, the Italians in turn had borrowed the term from the Greek ‘gráphein’ (γράφειν) meaning to write.

From the same origins the Germans first coined the common designation for the form of carbon useful for writing, ‘graphite’.


 
BENCH RUNNING

Plaster mouldings can either be formed 'in place' or on a flat table or 'bench' to be later applied.

When formed on a bench typically Plaster of Paris, moulding plaster is used which has a rapid set. You have to move quickly when using pure moulding plaster hence the term 'running'.
 



GYPSERIE


The technique of chiseling into fresh plaster in deep relief in situ (called ‘gebs’ in Arabic) is a craft that was developed to perfection by the Moors. After the expulsion of the Moors from the Iberian peninsula Muslim artisans were given opportunity to convert and some continued their craft in Christian motifs developing a very rich tradition in Provence.

Gypsum is the ideal medium for this technique. While fresh gypsum plaster is soft enough to easily carve it has great plasticity and will not easily crumble. This makes it possible to achieve deep undercuts with sharp edges and thin details that soon develops hardness and durability as the plaster dries and fully cures.
 


Contributed by Patrick Webb 

7 comments:

  1. very nice....this blog is looking so informative and useful for those who are seeking for plastering their homes and offices. there is very detailed information about plastering and rendering..If you are seeking a good plastering company in Surrey UK. Browse www.trplasteringservices.co.uk

    ReplyDelete
  2. plasterer surrey
    Intelligent domain valuation and estimation based on appraisal values and analytical data.
    Twenty-five years ago, I spent six months flat on my back with a dislocated disk, unable to much of anything but nap & read. One day, my once-a-week cleaning woman was dusting my bedroom, and she paused as she picked up a paperback copy of "Bleak House" that was lying near my sickbed. She looked at the cover, which showed a painting of a woman in an somberly decorated 1880s interior, then looked around. "Looks like this place."

    ReplyDelete
  3. plasterer surrey
    Advice from others more experienced than himself and enlisted the

    help of a neighbour who had previously witnessed a plumber

    connecting a them the competence necessary for achieving the job,

    seminars in Sociology at the University.

    ReplyDelete
  4. [url=http://www.rpsplastering.com]plasterer surrey[/url]
    I found your website the other day and after reading a handful of posts, thought I would say thank you for all the great content. Keep it coming! I will try to stop by here more often.
    RPS Plastering Service base in Sutton with works carried out with in the M25 and surrounding areas.

    ReplyDelete
  5. [url=http://www.rpsplastering.com]plasterer surrey[/url]
    Hi There, I just spent a little time reading through your posts, which I found entirely by mistake whilst researching one of my projects. Please continue to write more

    because it’s unusual that someone has something interesting to say about this. Will be waiting for more!

    ReplyDelete
  6. Gypsum Putty

    Very informative blog, Hope this helps many!

    ReplyDelete
  7. Gypsum Putty
    Really impressed! Very informative blog.

    ReplyDelete